When a commercial door fails the business usually stops, so the calculation is different — response time matters more than the price of the part.
No obligation. Takes 30 seconds.
Garage Door Repair Gold Coast connects the Gold Coast and the Gold Coast property owners with qualified, connects Gold Coast property owners with experienced garage door technicians for commercial. Tell us what the door is doing and we'll match it to someone who works on that type, in your area — firm price before work starts.
A residential door might cycle four times a day. A workshop or warehouse door can do that in an hour. Everything wears proportionally faster — springs are rated in cycles, and a commercial spring reaches its rated life in a fraction of the calendar time.
That makes scheduled servicing genuinely economic on commercial doors in a way it sometimes isn't domestically. Unplanned downtime costs more than the service.
The industrial pockets — Molendinar, Arundel, Yatala, Burleigh's light industrial estates and the Southport service areas. Mixed-use developments along the coastal strip carry a lot of shutters too.
Body corporate and strata doors are their own category: high cycle counts, shared responsibility, and approval needed before work starts.
Commercial doors carry workplace safety obligations that domestic ones don't — auto-reverse, safety edges and regular inspection. Worth being explicit that a door over a public or staff thoroughfare is in a different category from the one on your house.
the Gold Coast.
Where this job typically sits. Access is usually a bigger cost driver than size.
| Job | Indicative price | What moves it |
|---|---|---|
| Service call / diagnosis | $90 – $180 | Callout and assessment. Usually credited against the repair if you go ahead. |
| Torsion spring replacement | $250 – $600 | Priced per spring. Doors with two springs are normally done as a pair. |
| Cable replacement | $150 – $350 | Often done alongside springs — the two wear together. |
| Motor / opener repair | $150 – $450 | Boards, capacitors and gear sets. Cheaper than replacing the unit where the parts exist. |
| New motor / opener supplied and fitted | $450 – $1,200 | Depends on horsepower, drive type and whether Wi-Fi control is wanted. |
| Roller door repair | $180 – $600 | Curtain, drum, spring or guide work on a roller door. |
| Off-track / re-alignment | $150 – $400 | Common after something clips the door. Check the panels before assuming it's just tracks. |
| Panel or section replacement | $300 – $900+ | Per panel, and colour-matching an older door is the variable. |
| Remote or keypad replacement | $60 – $220 | Coding a new remote is often a five-minute job. |
| Full door replacement (existing opening) | $1,400 – $4,000+ | Sectional, roller or tilt, plus wind classification for the site. |
Prices are indicative only. What a job costs depends on the door type, the part, and whether it can be repaired or has to be replaced. You get a firm price before any work starts.
The door won't open, won't close, or is making a noise it didn't used to make.
The most common failure, and the one job genuinely worth not attempting yourself.
Openers that hum, stall, run without moving the door, or have stopped entirely.
Curtain, drum, spring and guide work on residential and commercial roller doors.
Scheduled servicing that keeps a door running and catches parts before they fail.
Doors that have jumped their tracks, and the cable failures that usually cause it.
Tell us the suburb and what the door is doing and we will match it to the right person.
Call 0489 983 212